Home Products Technology About Contact Get a Quote
Series 01 — Wall Saw

Wall Saw
Series

High-frequency electric wall saws in two configurations: Full-Guard with CE certification for regulated markets, and Half-Guard for lightweight flexibility in other regions. Both share the same Super Clutch core and can be upgraded to wire saw mode with an optional conversion kit.

Request a Quote → ← All Products
VOPEN Wall Saw Series
Choose Configuration

Full-Guard vs Half-Guard

Same Super Clutch core — different blade guard configurations for different markets and job site requirements. Both support optional wire saw conversion.

SpecificationV5W2V7W2
Motor Power22 KW37 KW
Motor TypeDomestic High-Freq.Imported High-Freq.
Max Blade DiameterΦ 1,600 mmΦ 2,140 mm
Max Cutting Depth720 mm1,020 mm
Drive UnitVE-5 ProVE-7
Guard TypeFull-Guard — 14.5 KGFull-Guard — 14.5 KG
CertificationCE Certified ✅CE Certified ✅
Wire Saw UpgradeAvailable (kit)Available (kit)
Power Supply380V / 220V380V / 220V
Clutch SystemSuper ClutchSuper Clutch
V5W2
V5W2
22KW — Full-Guard · CE Certified
Full enclosure guard with domestic 22KW motor. Standard workhorse for concrete wall and floor cutting in regulated markets.
Power22 KW
Max BladeΦ 1,600 mm
Max Depth720 mm
Guard Weight14.5 KG
CertificationCE ✅
Wire SawUpgradeable
V7W2
V7W2
37KW — Full-Guard · CE Certified
Imported 37KW motor with full enclosure guard. For super-thick concrete, large diameter blades, and heavy-load operations in regulated markets.
Power37 KW
Max BladeΦ 2,140 mm
Max Depth1,020 mm
Guard Weight14.5 KG
CertificationCE ✅
Wire SawUpgradeable
SpecificationV5V1V7V1
Motor Power22 KW37 KW
Motor TypeDomestic High-Freq.High-Freq.
Max Blade DiameterΦ 1,600 mmΦ 2,200 mm
Max Cutting Depth720 mm1,020 mm
Guard TypeHalf-Guard — 3.5 KGHalf-Guard — 3.5 KG
Output Torque230 / 314 Nm387 Nm
CertificationNo CENo CE
Wire Saw UpgradeAvailable (kit)Available (kit)
Power Supply380V / 220V380V / 220V
Clutch SystemSuper ClutchSuper Clutch
V5V1
V5V1
22KW — Half-Guard · Non-CE Markets
Lightweight half-guard at just 3.5KG. Same Super Clutch protection and 22KW power as V5W2 — lighter to deploy, easier to maneuver, more cost-effective.
Power22 KW
Max BladeΦ 1,600 mm
Max Depth720 mm
Guard Weight3.5 KG ↓75%
CertificationNo CE
Wire SawUpgradeable
V7V1
V7V1
37KW — Half-Guard · Non-CE Markets
Maximum power with minimum guard weight. 387Nm torque, Φ2200mm max blade — and a guard that weighs just 3.5KG. Best of both worlds for high-power, high-agility sites.
Power37 KW
Max BladeΦ 2,200 mm
Max Depth1,020 mm
Guard Weight3.5 KG ↓75%
CertificationNo CE
Wire SawUpgradeable
Core Technology

What Makes It Different

"Those who control time, control everything." — Mechanical protection first, smart shutdown second. Shared across all four wall saw models.

⚙️
Super Clutch System
Mechanical clutch slips at zero delay under overload — absorbing peak shock before it reaches the gearbox. Creates a 10–20 second control window. Zero gearbox damage.
💧
Full-Path Water Cooling
Cooling flows through drive unit, motor housing, clutch, gearbox, and out through the blade flange. Complete thermal management. 24h continuous operation.
⚡
One-Key Triple-Connect
Power, electrical, and water connections unified into a single quick-connect system. One cable, one water hose. Faster setup, single-operator capability.
🔧
Tool-Free Quick Gearbox
Switchable without tools for different cutting conditions. Enables full motor power output with large blades by mechanically reducing speed while doubling torque.
🛡️
Dual Buffer Feed System
Elastic buffer structures at both the feed wheel and arm tip pre-absorb mechanical shock — protecting the drive system in the most demanding conditions.
🤖
Smart Assisted Cutting
Hundreds of control calculations per second. Works with the Super Clutch to recover from jam conditions. Automatic cruise cutting mode after 1 minute.
Not sure which configuration?
Tell us your market and project — we'll recommend the right model.
Contact Us →